they are necessary. For example, the system automatically displays a related screen when it senses any of the
following events:
• Adjusting the trim brings up the Trim screen
• Adjusting the ballast brings up the Ballast screen
• Pushing the Perfect Pass button brings up the Perfect Pass screen
• Any alarm condition brings up a warning screen.
Selecting the
DEPTH
tab goes to the screen illustrated. This screen digitally displays depth, water
temperature, air temperature, and illustrates the depth trend. The system also has a user adjustable depth
alarm that can be adjusted from the
SETUP
tab.
Selecting the
BALLAST
tab goes to the screen illustrated below. It allows the driver to see the status of
all the ballast tanks installed in the boat. This tab is a plug and play tab so uninstalled ballast tanks do not
appear on the screen.
Selecting the
TRIM
tab goes to one of the screens illustrated below. These screens display the position of
the installed single-trim tab or dual-trim tabs.
Selecting the
MAIN
tab goes to the screen illustrated in the next column. Any information available to
the instrumentation system may be selected by the driver to be displayed in this screen. This screen is orga-
nized into four (4) quadrants with the user-selected information digitally displayed in each quadrant.
To change the information displayed simply:
• Press the
UP
or
DOWN
arrows to highlight the quadrant that you wish to change
• Press
SELECT
to access the pull-down menu
• Using the
UP
or
DOWN
arrows highlight the desired information.
• Press
SELECT
again to store the change
2011 Owners Manual...Instrument Gauges and Switches...Page 5-13
Summary of Contents for prostar 190 2011
Page 26: ...Guide to Individual Models 2011 Owners Manual Guide to Individual Models Page 4 1...
Page 81: ......
Page 93: ......
Page 105: ......
