4
Some of these following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow
you to operate the tool better and safer.
SYMBOL NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
.../min
Alternating Current Type of current
.../min
Direct Current
Type or a characteristic of current
n
o
No Load Speed
Rotational speed, at no load
.../min
Class II
Construction
Double-insulated construction
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
.../min
Wet Conditions
Alert
Do not expose to rain or use in damp locations.
.../min
Read The
Operator’s Manual
To reduce the risk of injury, user must read operator’s
manual.
.../min
Eye Protection
Always wear safety goggles or safety glasses with side
shields, or a full face shield when operating this product.
.../min
Safety Alert
Precautions that involve your safety.
.../min
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
.../min
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
.../min
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
.../min
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
.../min
Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.
Summary of Contents for 267-3333
Page 24: ...24 ...
