HALOGENATED HYDROCARBON SOLVENTS. For example: Methylene is not chemically compatible with
the aluminum that might be used in many system components. The chemical reaction caused by these
solvents reacting with aluminum can become violent and lead to an equipment explosion. Guns with
stainless steel fluid passages can be used with these solvents. However aluminum is widely used in
other spray application equipment such as material pumps and cups. Make sure these can also be used
safely with these solvents. Read the label or data sheet for the material you intend to spray. If in doubt
as to whether or not a coating or cleaning material is compatible, contact your material supplier.
Spray materials may be harmful if inhaled, or if there is contact with the skin. Adequate exhaust must
be provided to keep the air free of accumulations of toxic materials. Use a mask or respirator whenever
there is a chance of inhaling sprayed materials. The mask must be compatible with the material being
sprayed and its concentration.
SPECIFICATIONS
Fluid Tip Size:
1.8 mm Diameter
Air Inlet:
1/4" (6,35mm) NPS
Air Consumption:
10 CFM (50 PSI)
Capacity of Cup:
33.8 fl. oz. (1 liter)
Maximum Pressure:
90 PSI
FIGURE 1
Air Nozzle
Air Cap
Container Lock
Container
External Needle Pack
Adjustment (Packing Nut)
Fluid Control
Knob
Spray Pattern
Adjustment Knob
Trigger Handle
Pressure Tube
Trigger Pivot
Point
3
