background image

 

 

 

 

 

 

 

User Manual 

 

PDT-1000W Series 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright 

@ 2009 Masterpiece Technology (International) Co., Ltd. All rights reserved. Masterpiece Technology 
(International) Co., Ltd. retain the right to make changes to this manual at any time without notice. 
 
Without Masterpiece Technology (International) Co., Ltd written permission shall not be reproduced in 
any form, of any part of the dissemination of this manual. This manual has been validated and reviewed 
for any loss caused by errors, omissions or discrepancies between the manual and product, Masterpiece 
Technology (International) Co., Ltd. does not assume any liability. 
 

Trade Marks 

 
All company and product names mentioned in this manual are the legitimate rights and interests of 
people who hold trademarks or registered trademarks. 

 

FCC Class B Information 

Has been tested in accordance with Part 15 of the FCC regulations, the products comply with the 
provisions of the Class B digital device. These provisions are intended for the installation of the product, 
to provide reasonable protection against harmful interference. This equipment generates, uses and can 

Vesion

  V 1.20 

Type No.

PDT-1000W-A0/A2 Series 

Date

 

Summary of Contents for PDT-1000W























Reviews: