System will not turn on:
Check power plug and breakers.
Low water level alarm:
Add more water – the water level can be dropped during operation by the pump due to water
turbulence.
Low water level alarm turns on after a few seconds of operation:
Add more water – The pump generates “waves” – sometimes these waves will cause the water level
at the sensors to fluctuate up and down. The waves sometimes drop the water level right under the
sensor and will cause a low water alarm. This is normal and you just need to add more water.
Temperature read does not match thermometer:
Sous Vide circulators are calibrated to a scientific platinum primary standard which is far more
accurate than store thermometers.
Lights in house are slightly flickering when system is on:
This is normal as the circulator is modulating power.
Error code E3 will be appeared in below situation with alarm sound:
1. No water in tank
2. Water below minmum level
3. Appliance in situation of short cuicuit
TECHNICAL SPECIFICATIONS
Power:
120V, 60Hz , 1000W
Temperature:
maximum 95 °C
Temperature difference:
± 0.1°C
Pump return volume:
maximum 8LPM
Timer:
maximum 99 hours 59 minutes
Machines should not be disposed of as waste materials.
The disposal of the machinery must be handled by regular registered waste disposal companies or
public waste agencies.Please comply with the relevant laws and regulations. If you have any
questions, please consult the local waste disposal agency.
EN
08
