SETUP (TEMP./TIMER)
EN
EN
INTRODUCTION
SETUP (CLAMP & POT)
Our product needs a container or pot with 5 or 15
liters capacity.
The clamp of our product is used to fix in the rim of
the container or pot.
02
03
Control panel
+ adjustment button
- adjustment button
IPX7 Waterproof Design
Setting button
Maximum Water level
Minimum Water level
Water pump cap
On/Off button
Stainless steel housing
Water pump
1. Plug it into the outlet.
The button will be turn red light,the sous vide is power on.
2. Press and hold the button more than 3 seconds
.
The button and working lamp will be on and it will start the
standby mode.
4. Press the button to set the time.
You can find the timer blinks.
First press the + or – button to set hour, then press again to set
the minute.
The timer will countdown when it meets the setting temperature.
5. The unit will stop automatically when it runs out of time.
Return to initial state.
3. Press the button, The machine began to work.
