Page 1
PRODUCT INFORMATION:
Study, understand and follow all instructions provided with
this product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these
instructions in a safe accessible place.
INTENDED USE OF THE TOOL
Caution: To help prevent personal injury
WARNING
WARNING
DO NOT DISCARD – GIVE TO USER
1901038_01
The LUBJP is designed to be used with a ball joint set or
adapter kit and install press-fit ball joints of large trucks
and equipment that need the extra c-frame press clearance.
Do not use this tool outside of the designed intent. Never
modify the tool for any other purpose or use.
Made in China
to Matco specifications
When unpacking, check the parts diagram and part number
listing on page
3
to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
BEFORE USE
GREASE THREADS BEFORE USE.
LARGE UNIVERSAL
BALL JOINT PRESS
LUBJP
• Use of this product can expose you to chemicals including
ethylene glycol, gasoline vapors and engine exhaust, which
are known to the State of California to cause cancer, birth
defects, or reproductive harm. For more information, visit
www.P65Warnings.ca.gov. Always wear ANSI approved
safety equipment, safety glasses and clothing when using
this product. Study, understand, and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for which
it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
The manufacturer warrants this product to the original user
against defective material or workmanship with a lifetime
guarantee.
The manufacturer reserves the right to determine whether
the part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs
or replacements of products covered under this warranty are
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
LIFETIME WARRANTY
Heavy Duty.
Oversized forged C-frame press
for impact use.
Increased access.
At 12"
long and a 9"
throat,
Matco's Large Universal Ball Joint Press allows
fitting large or multiple adapters when working
on suspension arms.
Universal.
Works with most ball joint sets and
adapter kits like BPS400, MBP1000, MBJA20 as
well as other brands.
