MPTL144DD/MPTL192DD
1
Rev. 08/30/06
Copyright © Professional Tool Products, 2006.
All rights reserved.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
• Operating Instructions • Warning Information • Parts Breakdown
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
FULLY CHARGE BATTERY FOR 1
HOUR BEFORE INITIAL USE.
DRAIN BATTERY COMPLETELY
BEFORE RECHARGING.
FOR MAXIMUM BATTERY LIFE:
ALWAYS DRAIN AND CHARGE
COMPLETELY.
IMPORTANT
MPTL144DD
3/8" 14.4v Drill and
Driver with LED Light
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.6"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . 4.2 lbs.
Battery Type . . . . . . . . 1.3ah Ni-Cd Slide on Style
No Load Speed Low . . . . . . . . . . . . . 0-250 RPM
No Load Speed High . . . . . . . . . . . 0-1,170 RPM
Free Speed Drill Mode . . . . . . . . . . . 0-325 RPM
Free Speed Drive Mode . . . . . . . . . 0-1,170 RPM
Charge Time. . . . . . . . . . . . . . . . . . . . . . . 1 Hour
Maximum Torque . . . . . . . . . . . . . . 300 inch lbs.
SPECIFICATIONS
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.2"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . 4.6 lbs.
Battery Type . . . . . . . . 2.0ah Ni-Cd Slide on Style
No Load Speed Low . . . . . . . . . . . . . 0-340 RPM
No Load Speed High . . . . . . . . . . . 0-1,220 RPM
Free Speed Drill Mode . . . . . . . . . . . 0-340 RPM
Free Speed Drive Mode . . . . . . . . . 0-1,220 RPM
Charge Time. . . . . . . . . . . . . . . . . . . . . . . 1 Hour
Maximum Torque . . . . . . . . . . . . . . 350 inch lbs.
SPECIFICATIONS
MPTL192DD
1/2" 19.2v Drill and
Driver with LED Light
