MST5907
INSTRUCTIONS:
1. Remove bearing cup bolts and bolt keepers
2. Adjust the puller cup to allow it to accept the yoke.
3. Turn the center screw assembly until the is against the yoke (reverse thread).
4. Use a ratchet or either 3/8” or 1/2” (no larger) impact wrench release the
bearing cup.
5. Once the first bearing cup has been fully extracted, rotate the driveshaft and
repeat steps 2 through 4.
www.matcotools.com
Item
Part Number
Description
1
907-1
Puller Frame
2
907-2
Puller Cup
3
907-3
Center Screw Assembly
4
907-4
Cup Plug
5
N/A
Retainer Ring
1
2
3
4
5
