background image

MT2835A  2 06/17/13

MT2835A 1/4" Dr. Mini Air Ratchet

FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY

OPERATION

The MT2835A 1/4" ratchet is designed to fasten and unfasten 

threaded fasteners while operating under recommended 

conditions. Note the directional setting of the reversing button 

before depressing the throttle. Ensure body stance to be in 

excellent balance and have full control of the tool before use. Be 

fully alert as sudden reaction torques and directional changes 

may unexpectedly occur. Be aware that air ratchets are not 

torque wrenches or pry bars. Joints and fasteners requiring a 

specific torque must be checked with a torque wrench as the final 

step. Using the air ratchet while the power is in the "off" position, 

to tighten or break-free fasteners, can irreversibly damage its 

internal mechanism and will void any remaining warranty.

WARNING

This insTrucTion Manual conTains 

iMporTanT safeTy inforMaTion. 
read This insTrucTion Manual carefully 

and undersTand all inforMaTion Before 

operaTing This Tool.

•  Always operate, inspect and maintain this tool in accordance  

  with  American  National  Standards  Institute  Safety  Code  

  of Portable Air Tools (ANSI B186.1) and any other applicable  

  safety codes and regulations.
•  For  safety,  top  performance  and  maximum  durability  of  

  parts, operate this tool at 90 psig 6.2 bar max air pressure  

  with 3/8" diameter air supply hose.
•  Always wear impact-resistant eye and face protection when  

  operating or performing maintenance on this tool.
•  Always wear hearing protection when using this tool. High  

  sound levels can cause permanent hearing loss. Use 

 

  hearing  protection  as  recommended  by  your  employer  or  

  OSHA regulation.
•  Keep the tool in efficient operating condition.
•  Operators  and  maintenance  personnel  must  be  physically  

  able to handle the bulk, weight and power of this tool.
•  Air  powered  tools  can  vibrate  in  use.  Vibration,  repetitive  

  motions or uncomfortable positions over extended periods  

  of time may be harmful to your hands and arms. Discontinue  

  use  of  tool  if  discomfort,  tingling  feeling  or  pain  occurs.  

  Seek medical advice before resuming use.
•  Air  under  pressure  can  cause  severe  injury.  Never  direct  

  air at yourself or others. Always turn off the air supply, drain  

  hose of air pressure and detach tool from air supply before  

  installing, removing or adjusting any accessory on this tool,  

  or before performing any maintenance on this tool. Failure  

  to do so could result in injury. Whip hoses can cause serious  

  injury.  Always  check  for  damaged,  frayed  or  loose  hoses  

  and  fittings,  and  replace  immediately.  Do  not  use  quick  

  detach couplings at tool. See instructions for correct 

 

 set-up.

•  Place the tool on the work before starting the tool. 
•  Slipping, tripping and/or falling while operating air tools can  

  be  a  major  cause  of  serious  injury  or  death.  Be  aware  of  

  excess hose left on the walking or work surface.
•  Keep  body  working  stance  balanced  and  firm.  Do  not  

  overreach when operating the tool.
•  Anticipate and be alert for sudden changes in motion during  

  start up and operation of any power tool.
•  Do not carry tool by the hose. Protect the hose from sharp  

  objects and heat.
•  Tool  shaft  may  continue  to  rotate  briefly  after  throttle  is  

  released. Avoid  direct  contact  with  accessories  during  and  

  after use. Gloves will reduce the risk of cuts or burns.
•  Keep away from rotating end of tool. Do not wear jewelry or  

  loose clothing. Secure long hair. Scalping can occur if hair  

  is  not  kept  away  from  tool  and  accessories.  Choking  can  

  occur  if  neckwear  is  not  kept  away  from  tool  and  

 accessories.
•  Use accessories recommended by Matco Tools. 
•  Do  not  lubricate  tools  with  flammable  or  volatile  liquids  

  such as kerosene, diesel or jet fuel.
•  Do not force tool beyond its rated capacity.
•  Do not remove any labels. Replace damaged labels.
• 

Use only impact sockets and accessories that are 

  recommended by the manufacturer for your model 
  Accessories that may be suitable for one tool may create 
  a risk of injury when used on another tool.

•  This  product  may  contain  one  or  more  chemicals  known  
  to the State of California to cause cancer and birth 
  defects or other reproductive harm. 

Wash hands thoroughly  

  after handling.

Summary of Contents for MT2835A








Reviews: