background image

MUC122ID 

rev. 02/04/14

MUC122ID 12V Impact Driver

IMPORTANT!

All rechargeable batteries have a finite lifespan and will slowly 
lose storage capacity as they age and are cycled. Rechargeable 
batteries are consumable items and should be carefully treated 
to ensure proper operation during its limited lifespan. Please 
read the following guide carefully for tips that may maximize 
the performance of your Matco rechargeable batteries. Batteries 
should be handled with care and disposed through proper 
authorities. 

WARNING! MUST READ!

Do not crush or incinerate batteries as it may cause danger 
from explosion. 
Do not place batteries in confined spaces where it may be 
in contact with conductive objects. For example, do not 
place battery in pockets, tool boxes, tool bags, etc. with 
screws, keys, metal shavings, etc. as the battery may short 
circuit and/or cause fire hazard. 

Only charge in Matco chargers and never attempt to wire to 
alternative charging sources
Danger of explosion, electric shock, fire, and electrocution may 
result from: 
-  Abuse, misuse, and severe shock   
-  Subjecting the unit to conductive particles, objects,  
 

and liquids 

-  Connecting two chargers together
-  Charging Matco batteries with other chargers
-  Using the Matco charger to charge other    

 

 batteries
-  Operating the charger with a damaged cord or  

 

 plug

PROPER CARE WILL MAXIMIZE PRODUCT LIFE

Please note that there are differences in the care of 
Lithium-Ion and Nickel-Cadmium batteries. 

PROPER CARE FOR MATCO INFINIUM  

LITHIUM-ION (LI-ION) BATTERIES

-  All Li-ion batteries are sensitive to high temperature and 
should be kept cool, dry, and out of direct light exposure. Ideal 
temperature range for operation and storage is between 32 and 
75 °F. Li-ion batteries may be stored in the refrigerator,  
but freezers are not recommended. 
-  Do not leave batteries unused for extended periods of time, 
especially when it is fully charged or fully discharged. Bring a 
Li-ion battery to approximately 50% charge level before storing.
-  Li-ion batteries are sensitive to shock. Avoid dropping, 
hitting, or exposure to vibration.
-  Li-ion can be charged frequently and recharged before it 
is fully depleted. Li-ion, in fact, is ideally recharged before it 
is completely depleted. Recharging when there is 25%-50% 
capacity remaining in the battery may prolong its lifespan. 
-  Contaminants can adversely affect the performance and life 

of Li-ion batteries. Minimize the battery’s exposure to dust, dirt, 
and small particles.  
-  Recharge Matco Li-ion batteries only in Matco recharging 
devices that are designed specifically for the battery type. 
Never subject batteries to any other quick-charging, quick-
discharging, or quick-restoring devices. 

PROPER CARE FOR MATCO NICKEL-CADMIUM  

(NI-CD) BATTERIES

-  Ni-Cd batteries are sensitive to high temperatures and 
should be kept cool, dry, and out of direct light exposure. Ideal 
operating and storage temperature is between 32 and 70 °F. 
Ni-Cd batteries may be stored in a refrigerator, but freezers are 
not recommended.
-  Do not leave batteries unused for extended periods of time. 
Store Ni-Cd batteries fully discharged in a cool and dry place.
-  Ni-Cd batteries are sensitive to shock. Avoid dropping, 
hitting, or exposure to vibration. 
-  Ni-Cd batteries should be fully discharged inside the 
tool before recharging. Furthermore, the battery should be 
fully charged before it is removed from the charger. Frequent 
charges and removals at intermitting levels may reduce the 
capacity of the battery. 
-  Perform the “Refresh Cycle” for Ni-Cd batteries inside the 
Matco MUCHRG1 Universal Charger on a monthly basis. For 
light usage, perform this function once every three months. 
Note that this feature is not applicable or necessary for Li-ion 
batteries. 
-  Contaminants can adversely affect the performance and life 
of Ni-Cd batteries. Minimize the battery’s exposure to dust, dirt, 
and small particles. 
-  Recharge Matco Ni-Cd batteries only in Matco recharging 
devices that are designed specifically for the battery type. Never 
subject batteries to other quick-charging, quick-discharging, or 
quick-restoring devices. 

MATCO CORDLESS BATTERY USE AND CARE GUIDE

Summary of Contents for MUC122ID






















Reviews: