background image

MUC122ID 

rev. 02/04/14

MUC122ID 12V Impact Driver

MATCO 12V CORDLESS TOOLS

 

Matco Tools warrants its 12V tools to be free from defects in 
material and workmanship for a period of (2) years from the 
original date of purchase with one year of free service. In the 
second year, if inspection shows the trouble is caused by a 
defect in material and/or workmanship, Matco will repair (or 
replace at our option) without charge. Registration is required 
through your local authorized Matco distributor and/or by 
submission of completed registration form included with the 
product. Defective products must be returned and analyzed by 
Tri-County Power Tool, Inc. for the United States or Pneutool 
Parts & Services, Ltd for Canada, at the addresses listed below, 
freight prepaid.  Any tool that has been serviced by the user or 
by an unauthorized service center will subsequently void the 
warranty of the tool. 
Misuse, abuse or normal wear of a product is not covered under 
warranty.
Defects in material and workmanship do not apply where the 
issues below are present:
•  Repairs were made or attempted by unauthorized service 
center or individual.
•  Repairs are required because of normal wear and tear on 
the tool. Normal wear and tear items to include but not limited 
to carbon brushes, TPR (rubber grip portions) wear, switch 
failure, PCB (internal circuit board wear), socket retaining rings, 
etc. These are examples of some failures that may not be 
covered under defects in material and workmanship but are 
considered normal wear and tear.  
•  The tool has been misused, abused, or not given the 
proper maintenance. (example, Cordless ratchet heads should 
be greased, tool motors should not be exposed to harmful 
substances such as (cleaning chemicals, excessive dust and 
dirt, and metal shavings or debris) 
•   Alterations or improper accessories were used with the 
product.

MATCO 12V LITHIUM-ION   
BATTERY MUC12LB / CHARGER MUC12LC

Matco Tools warrants its 12V Lithium-ion (battery/charger) to 
be free from defects in material and workmanship for a period 
of (2) years from the original date of purchase. Registration is 
required through your local authorized Matco distributor and/or 
by submission of completed registration form included with the 
product.  If the battery/charger should fail within the warranty 
period, it must be returned and analyzed by Tri-County Power 
Tool, Inc. or Pneutool Parts & Services, Ltd. at the addresses 
listed below, freight prepaid. A battery capacity defect  could 
be defined as the battery no longer accepting a charge, or 
holding a charge for the battery manufacturing specified period 
as determined by Matco Tools Repair center. Based on the 
evaluation, Matco Tools, at their discretion, will either repair 
or replace any batteries to be found defective in material or 
workmanship at no charge.  Please see Matco Battery Care 
Guide in the Cordless Operating Manual for any of the Infinium 
products. You will find helpful tips that may maximize the useful 
life of your battery.  
Address for Returns as follows:
 

  

 

TRI-COUNTY POWER TOOL, INC. 
1300 Brookpark Rd. 
Cleveland, OH 44109
(216) 398-6120
Fax: (216) 398-6121
Toll Free: 1-866-873-8278

PNEUTOOL PARTS AND SERVICE CO. LTD. 
33 Haas Rd.
Toronto, ON M9W 3A1 Canada
(416) 748-2100
(888) 748-1201 Toll Free In Canada

MATCO CORDLESS WARRANTY

 

Summary of Contents for MUC122ID






















Reviews: