background image

MUC122IW 7 

rev. 12/27/12

MUC122IW 12V Impact Wrench

MATCO 12V CORDLESS TOOLS

 

Matco Tools warrants its 12V tools to be free from defects in 
material and workmanship for a period of (2) years from the 
original date of purchase with one year of free service. In the 
second year, if inspection shows the trouble is caused by a 
defect in material and/or workmanship, Matco will repair (or 
replace at our option) without charge. Registration is required 
through your local authorized Matco distributor and/or by 
submission of completed registration form included with the 
product. Defective products must be returned and analyzed by 
Tri-County Power Tool, Inc. for the United States or Pneutool 
Parts & Services, Ltd or Diversified Power Inc for Canada, at the 
addresses listed below, freight prepaid.  Any tool that has been 
serviced by the user or by an unauthorized service center will 
subsequently void the warranty of the tool. 
Misuse, abuse or normal wear of a product is not covered under 
warranty.

Defects in material and workmanship do not apply where the 
issues below are present:
•  Repairs were made or attempted by unauthorized service 
center or individual.
•  Repairs are required because of normal wear and tear on 
the tool. Normal wear and tear items to include but not limited 
to carbon brushes, TPR (rubber grip portions) wear, switch 
failure, PCB (internal circuit board wear), socket retaining rings, 
etc. These are examples of some failures that may not be 
covered under defects in material and workmanship but are 
considered normal wear and tear.  
•  The tool has been misused, abused, or not given the 
proper maintenance. (example, Cordless ratchet heads should 
be greased, tool motors should not be exposed to harmful 
substances such as (cleaning chemicals, excessive dust and 
dirt, and metal shavings or debris) 
•   Alterations or improper accessories were used with the 
product.

MATCO 12V LITHIUM-ION   
BATTERY MUC12LB / CHARGER MUC12LC

Matco Tools warrants its 12V Lithium-ion (battery/charger) to 
be free from defects in material and workmanship for a period 
of (2) years from the original date of purchase. Registration is 
required through your local authorized Matco distributor and/
or by submission of completed registration form included 
with the product.  If the battery/charger should fail within the 
warranty period, it must be returned and analyzed by Tri-County 
Power Tool, Inc.,  Pneutool Parts & Services, Ltd. or Diversified 
Power Inc at the addresses listed below, freight prepaid. A 
battery capacity defect  could be defined as the battery no 
longer accepting a charge, or holding a charge for the battery 
manufacturing specified period as determined by Matco Tools 
Repair center. Based on the evaluation, Matco Tools, at their 
discretion, will either repair or replace any batteries to be found 
defective in material or workmanship at no charge.  Please see 
Matco Battery Care Guide in the Cordless Operating Manual for 
any of the Infinium products. You will find helpful tips that may 
maximize the useful life of your battery.  
Address for Returns as follows:
 

  

 

TRI-COUNTY POWER TOOL, INC. 
1300 Brookpark Rd.
Cleveland, OH 44109
(216) 398-6120
Fax: (216) 398-6121
Toll Free: 1-866-873-8278

PNEUTOOL PARTS AND SERVICE CO. LTD. 
33 Haas Rd.
Toronto, ON M9W 3A1 Canada
(416) 748-2100
(888) 748-1201 Toll Free In Canada

DIVERSIFIED POWER, INC.
90 Buttermill Avenue,
Vaughan, Ontario
L4K 3X7 Canada
Tel: 905-760-9077 
Toll Free: 800-821-7975 

MATCO CORDLESS WARRANTY

 

Summary of Contents for MUC122IW














Reviews: