7
Page 23
7
Maintenance
Safety during maintenance
Switch off the vehicle engine, remove the ignition key and set the hand brake.
Before each use of implements, inspect all safety-related components, hy-
draulic connections and threaded connections.
Danger of crushing due to moving parts.
Never reach into the crushing hazard zone if parts are moving or can move.
Properly reattach all protective devices that have been dismounted after exe-
cuting the maintenance tasks.
Check all screw and bolt connections after the first 20 hours of operation, at
the start and end of the season, or after extended downtimes. Subject the im-
plement to regular maintenance. Use lubricating grease to lubricate the mov-
ing parts.
See lubrication schedule.
Maintenance
To ensure serviceability and compliance with occupational safety requirements, the following
tasks must be carried out after each use.
•
Check to ensure that all safety notices and safety devices are complete and function-
ing.
•
Inspect hydraulic connections and hoses for leaks.
•
Grease the moving parts of the implement.
•
Grease the lowering safeguard.
•
Grease the locking bolts.
•
Check all screw and bolt connections. Tighten any loose screws and secure loose
bolt connections with the securing elements provided. Comply with the screw tighten-
ing torques; see Table 1: Screw tightening torques
