Maintenance
Page 14
5
Maintenance
The entire implement must be subjected to regular service.
After first use, the threaded unions on the snow blade must be checked and retightened if
necessary. Particularly check the following components:
Blade plate
Blade extensions
Flap-segments
Scraper bars
Attachment bracket
Holder of the slide runners, or telescopic foot
Mechanism of the contact angle.
5.1
Daily maintenance
Check scraper bars for wear
Check adjustment of the slide runners or the casters
Check pendulum compensation for ease of movement
Check hydraulic connections and lines
Clean the implement.
Danger!
Hydraulic oil escaping under high pressure can penetrate under the skin
and cause severe injuries. Never attempt to find a possible leak point on the
hydraulic lines by feeling them with your hands.
5.2
Maintenance after 50 operating hours or after a longer standstill period.
At regular intervals, and always at the beginning and end of the season, the moving parts
of the implement must be checked and if necessary the threaded unions must be retight-
ened. The scraper bars must be checked for wear.
Lubricate the points cited below with grease (not with oil):
Fig. 13: Lubricating nipple - cylinder eyes
Lubricating
nipples
