25
MUSTS5003_05 20211101
All units:
12.
After an emergency stop / dismount, please ensure that the Sling Cushion’s Safety bars are snuggly
secured back on.
1
3
5(i)
5 (ii)
6
7 (i)
7 (ii)
8
9
10
WARNING:
●
When batteries are fully discharged, the Tek RMD automatic brake system will activate. Operating
the Tek RMD in isolation with low battery power may result in stranding. Always operate the Tek
RMD with charged batteries and available assistance.
●
Attempting to exit the device without battery power may cause instability, tipping, or falling,
resulting in injury or death, property damage, and damage to the device. Always ensure that a
caregiver is available if an emergency exit is necessary.
●
If batteries are discharged and the automatic brake system is activated, a caregiver must disengage
the brakes by moving the motor release levers on both sides of the device. Do not attempt to
disengage the brakes while secured in the Tek RMD. Attempting to reach the levers will cause
instability and tipping, resulting in injury or death, property damage, and damage to the device.
Charging the Batteries
Before using the charger, please read the user manual of the charger. The battery indicator on the
device displays
the current charge of the platform’s batteries. The battery indicator has 5 levels. A single
red-light blinking indicates that the batteries need charging, 1 red and 4 white lights indicate that the
batteries are fully charged.
The battery charger is compatible with 115V and 230V outlets. To charge the Tek RMD, turn the device
off from the User Panel and insert the main plug of the charger into the correct socket. Connect the
other end of the charger plug to the Tek RMD and charge fully.
The device can only be charged when the device main power is switched on. When the battery charger
is plugged in, the charger has multicolor indicator and it will show the following conditions:
1
LM+TB
1
LM+TB
1
LM+TB
GS
GS
GS
LM
LM
LM
Summary of Contents for TEKRMD01
Page 1: ......
Page 42: ...41 MUSTS5003_04 20210501...
