a
b
c
d
e
x 1
b
STAGE 6
THE TOP TRACK IS FACTORY ASSEMBLED FOR A
LH CORNER
TO REVERSE THE TRACK FOR RH CORNER SEE STAGE 7
IMPORTANT
DO NOT
OVER
TIGHTEN
INSIDE
VIEW
This stage is describing the fitting of the Top Track. To reverse the Top Track for a RH Corner see Stage 7.
Before fitting the top track plumb the glass panels for vertical and ensure the entrance dimension is correct.
a
. Lower the top track into position, ensuring the top track glass clamp, clamps around the top face of the fixed glass panel (a).
b
. Fit the wall mount top cap and corner extrusion fixing into the wall mount. Adjust as required.
c.
The top track can be adjusted left or right. Tighten the top track glass clamp by tightening the socket set screws on both sides (c).
d.
Important
- tighten the top track locking screws underneath the top track on the closure panel wall mount to fix the top track into
position.
e
. Fit the glass clamp covers (supplied in the kit of parts) over both sides of the top track glass clamps.
