PREVENTATIVE MAINTENANCE
Version 1.0 2013 IC-MXSB-01 Copyright by Indoorcycling Group GmbH 2013
|
www.indoorcycling.com
ENG 13
2
Regular maintenance must be performed on the Matrix S-Series Indoor Cycle for
optimal performance and longevity. Please read and follow all instructions below. If
the indoor cycle is not maintained as described, components may wear excessively
and the Matrix S-Series Indoor Cycle may become damaged. Improper maintenance
will void the warranty terms. If you have questions about maintenance, contact your
local distributor or refer to www.indoorcycling.com
Note: Many maintenance procedures require lubricant spray.
Manufacturer recommends Brunox or any other solvent free lubricant.
Daily maintenance:
1. Make sure that the Matrix S-Series Indoor Cycle is level. If the Matrix S-Series Indoor
Cycle rocks on your fl oor, turn the levelling feet underneath the front or rear stabilizer until
the rocking motion is eliminated (see „How to move the Matrix S-Series Indoor Cycle“ on
page 12).
2. After each user fi nishes exercising, the Matrix S-Series Indoor Cycle should be disinfected
and cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the hand-
lebars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply
a small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and the lock
handles. Avoid using strong detergents on the Matrix S-Series s Indoor Cycle frame.
Weekly maintenance:
1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean
the frame, the handlebar slider and seat sliders the fl ywheel and the plastic parts of the
Matrix S-Series Indoor Cycle.
2. For optimal performance of the resistance
system, and to minimize wear on the brake pad,
the
acid-, silicone- and solvent free spray lubricant
should be applied to the brake pad using the lubri-
cation holes on the plastic part of the brake pad. If
fuzz or lint appears on the brake pad, the brake pad
has become too dry-lubricant spray should be ap-
plied more frequently. Make sure brake pad is tho-
roughly soaked from end to end with lubricant spray.
Then, wipe the excess off.
ENG
ESP
