71
11.1 SOFTWARE UPGRADE PROCEDURE
1) Turn on the power to the treadmill, wait until the standard display picture has come up.
2) Enter Manager Mode by pressing and holding the LEVEL UP and DOWN keys simultaneously. Record the Accumulated Mileage and
Accumulated Distance. Scroll to Engineering Mode and record the Serial Number.
NOTE:
This information can be lost during the update
procedure and should be recorded so that the information can be re-entered into the console once it is updated.
4) Build a path of folders on the USB drive that will be used. The path should be MATRIX\FW\UCB (create a folder called MATRIX, then a
folder within MATRIX called FW, then a folder within FW called UCB).
5) Copy the software files into the UCB folder on the USB drive (the path should read \MATRIX\FW\UCB - Figure A).
6) Insert the USB drive into the USB port on the console (Figure B).
7) Press MANUAL and PAUSE simultaneously for 3 seconds to choose the correct software version(Figure C).
8) Wait until the display shows the message "Please choose update name", then press the LEVEL UP or DOWN keys to choose the correct
software (if more than one version is on the USB drive). Once the correct software is show, press ENTER and the upgrade procedure will run.
9) When the console beeps and the standard display picture comes back up (Figure B), the upgrade is complete. Remove the USB drive.
10) Enter into Manager Mode (see Section 5.1) and make sure the software version is correct.
11) Enter into Service Mode (See Section 7.1). Enter the values recorded in Step 3 (if needed).
12) Enter into Engineering Mode (See Section 6.1). Check that the serial number is correct.
13) Test the treadmill for function as outlined in Section 9.21.
FIGURE A
FIGURE C
FIGURE B
CHAPTER 11: SOFTWARE UPGRADE GUIDE
Summary of Contents for T1X-03AC
