MSC-UTX62L Product Manual
source 1 to physical source 5 on all levels. The fourth example maps source 1 to
physical source 6 on the second level only.
3.11.16 MascotVer Command
NOTE:
Superseded by the
ctl.mascot.ver
.
Query Mascot protocol version. This is useful for software which interacts with a device using the Mascot
protocol and wants to discover what protocol version is in use. The returned value is either an integer such as
"2" or major and minor version numbers separated by a period, such as "2.3".
Example
>MascotVer
2.3
>
3.11.17 MtxCfg Command
Routers and MSC-GCP2U32 only - Protocol Version: 2.0
Query matrix configuration. This command replaces the C command and provides the ability to query the
matrix dimensions, labels, current matrix state and preset data. The information to return is specified by the
sum of the flags values listed in the following table:
Flag
Information
Fields in JSON data
1
Return names (Destination, Source and
Preset).
destNames, srcNames and
psetNames
2
Return matrix routing state.
state
4
Return preset routing data.
psetData
The returned data is JSON formatted data (see
for details).
If no arguments are specified then a simple format is returned consisting of an array of arrays (one per level)
with 3 integer numbers specifying the destination count, source count and flags of the level. The flags value is
the sum of one or more values from the Flags table below.
Flags
Name
Value Description
mute
1
Mute support.
lock
2
Video lock status query support
reclk
4
Reclocker disable support.
Example
>MtxCfg
[[8,8,3][4,8,0]]
Page 33 of 60
© 2013-2020 Matrix Switch Corporation
