5
• Make sure that the machine is stable and on
solid ground.
• Take care when working: there is risk of injury
to fingers, hands and eyes.
• Keep children away from the machine when
it is plugged in.
• When the machine is being operated, all
guards and covers must be properly fitted.
• The operator must be at least 18 years old.
Apprentices must be at least 16 years old
and should be supervised when using the
machine.
• Persons working on the machine should not
be distracted.
• Keep the machine work station clear of chips
and wood waste.
• Wear tight-fitting clothing. Take off jewelry,
rings and watches.
• Wear a cap or hairnet to protect long hair.
• The safety devices on the machine must not
be dismantled or destroyed.
• Perform refitting, adjustment, measurement
and cleaning work only when the engine is
turned off. Unplug and wait for the rotating
parts of the tool to come to a complete
standstill.
• Switch off the machine when
troubleshooting. Unplug the machine.
• Installation, repair and maintenance work on
the electrical installation may only be carried
out by qualified professionals.
• All protective and safety equipment must
be immediately re-installed after repairs and
maintenance are completed.
• Do not expose the machine to moisture and
do not use near flammable liquids or gases.
• Take care during machine operation.
Use common sense when working. Do not
use the power tool when you are tired or
distracted.
• Never use outdoors when the general
weather and environmental conditions do not
allow it (e.g. charged atmospheres, during a
lightning storm or when it is raining).
• Wear appropriate clothing: Do not wear
wide sleeves, scarves, neckties, necklaces,
or bracelets, which could get caught in the
moving machine parts.
• Always use personal safety devices:
appropriate regulation goggles, well-fitting
gloves, outer or inner ear protection and a
hood that covers the hair if necessary.
• Pay attention to the power cable: it must
never catch on the machine or cause the
machine to become unplugged. Protect it
from sharp edges, oil and overheating.
• If an extension cord is needed, use only
approved products.
• Guard against electric shock: avoid contact
with grounded objects such as pipes, radiators
and refrigerators.
• Keep your work area clean.
• Do not overload the power tool - you will
work more safely within an appropriate output
range.
• Wear safety glasses and a dust mask when
carrying out work which generates dust. .
• Always connect the dust collection device
every time you work.
• Do not use the cable for purposes for which
it was not intended. Do not use it to pull the
plug from the socket. Keep the cable away
from heat, oil and sharp edges.
• Avoid inappropriate body posture. Keep
proper footing and keep your balance at all
times.
• Do not leave any wrenches or key tools in the
machine.
GB
