16
SECTION C: REMOTE ACCESS POINT MANUAL
Once done configuring the RAP, please remember to reboot the device by typing
reboot
as the RAP prompt.
APP / IpGateway
Sets the IP address of the gateway for the RAP to use if one is available on the network. Must be set to the
correct gateway unless DHCP is configured for the IP address, in which case it should be set to
null
.
APP / IpMetric
Should be set to true when the RAP is used with ActiHealth devices.
APP / IpDNS
Used to set the IP address of the DNS server for the RAP if a DNS server is available on the network. Set to
null if configured with DHCP.
The RAP must have at least one DNS Server.
APP / AHServerURL
Sets the URL of the server that the RAP is to send ActiHealth data to. Set to null for the RAP to send
ActiHealth data to a default URL based on the platform setting.
APP / AHOptions
Set to
null
for no options. When the platform is set to Fusion, AHOptions may be set to
/sound
. The sound
option causes the RAP to provide audible notification of its status. When the RAP is connected to the network
it will emit a single low pitch tone if it is unable to communicate with the FitLinxx servers, and a double high-
pitched tone when it is able to communicate again. It will also emit a very short low-volume chirp whenever it
successfully transfers data from a device to the FitLinxx servers.
Figure 9: The left example shows you how to change
the IP address of the RAP to 192.168.1.186
Note: 192.168.1.186 is being used as an example.
UPGRADING THE RAP
Matrix Asset Management will provide you with a USB memory stick upgrade (part #990043) if an upgrade is required. For more information
please contact our Customer Care Department at 866.693.4863
