22
23
CASTER WHEELS
SWEAT TRAY COLLECTOR
STEP BASE
ASSEMBLY
STEp 4
ASSEMBLY
STEp 3
A
Remove the five pre-attached console screws
from back of console.
B
Carefully connect all wires coming from the
mast to the inside of the console.
Note: depending on the console, not all cables
coming from the mast will need to be connected.
C
Attach console to console mast using provided
bolts. Secure tightly, being careful not to pinch
any wires.
A
Connect the wires from the frame to
the Base Step.
B
Lift the Base Step over the caster
wheels. Push down firmly on both
sides until it seats firmly.
C
Slide the Sweat Collector Tray under
the ClimbMill, latching the handle to
the base.
SOCKET HEAD BOLT(M8x8L)
5
CONTENTS ARE pRE-ATTACHEd:
ASSEMBLY COMPLETE!
climber_om_r1.7.indd 22-23
9/30/11 12:01 PM
