CHAPTER 4:
mX-t3
X
/ mX-t3
Xi
o
verlay
D
escription
/ p
rograming
/ e
ngineering
m
oDe
7
4.6 ENGINEERING MODE
Engineering screens allow the viewing and editing of variables that would
be necessary for a club operator/manager to customize. Unless otherwise
noted, engineering screens consist of the initial screen, the editing or
action screen, and the saving screen. The initial screen displays the vari-
able type, and in most cases, the current value. Edit or action screens
are where the editing of the variable(s) take place. The saving screen
indicates the variable(s) is being saved.
To access the Engineering screens press and hold the
ELEvATION UP
and
SPEED DOWN
buttons for three seconds. The display will now display
'Engineering Mode'.
Use the
ELEvATION
UP
or
DOWN
arrows to scroll through the different
engineering screens.
Press
SELECT
to edit the selected engineering screen.
Use the
SPEED UP
or
DOWN
arrows to set the variable.
Press
START
to save the selected variable.
4.7 MANAGER SCREEN DESCRIPTIONS / DETAILS
Below is a list of the MX-T3x functions for each engineering screen. Exceptions
will be noted in the description for each engineering screens:
LOW SPEED LEARN MODE (EDIT)
This variable controls the low limit for the speed of the treadmill.
MIDDLE SPEED LEARN MODE (EDIT)
This variable controls the middle limit for the speed of the treadmill.
HIGH SPEED LEARN MODE (EDIT)
This variable controls the high limit for the speed of the treadmill.
LOW ELEvATION LEARN MODE (EDIT)
This variable controls the low limit for the elevation of the treadmill.
HIGH ELEvATION LEARN MODE (EDIT)
This variable controls the the high limit for the elevation of the tread mill.
UNIT (EDIT)
Changes from Standard (Miles) to Metric (Kilometers).
Unit change will force unit dependent variables to revert to their default values.
LIMIT TIME (EDIT)
This variable controls the program maximum time.
SET WEIGHT (EDIT)
This variable controls the default weight used in the calorie calcula tions.
Sets to default on unit change.
Displayed in native units (kilorgram or pounds)
TOTAL TIME
Displays total accumulated time.
Accumulated time is not editable, for display only.
TOTAL DISTANCE
Displays total accumulated distance.
Accumulated distance is not editable, for display only.
Displayed in native units (miles or kilometers).
vERSION
Displays the product's software version.
Version is not editable, for display only.
LANGUAGE
Language in which information is displayed.
USER SPEED
This variable controls the default program speed.
USER TIME
This variable controls the default program time.
PRODUCT TEST
AUTO CHECK
DISPLAY TEST
KEYPAD TEST
OUT OF ORDER
P0
P1
P2
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
06'_Treadmills_M.indd 11
7/18/06 4:00:04 PM
