55
9.16 foot pEdalS rEplacEMEnt
figUrE c
figUrE a
1) Pull up on the rubber pad on top of the plastic pedal to expose the pedal screws (Figure A).
2) Remove the 4 Phillips screws that hold the plastic foot pedal to the foot plate (Figure B).
3) Remove the plastic foot pedal (Figure C).
4) Reverse Steps 1-3 to install a new foot pedal.
5) Test the Elliptical Trainer as outlined in Section 8.21.
figUrE b
cHaptEr 9: part rEplacEMEnt gUidE
