Matrix ETERNITY NE System Manual Download

Page: 183 / 996

Matrix ETERNITY NE System Manual

173

•

Double click the

Extensions

field. A new window opens.

•

Select the extension numbers as landing destination. These may be SLT, DKP or SIP extensions.

•

Set the

Ring Timer

for the extensions. This timer defines the time for which the extension, on which

the call lands, should ring. Default: 015 seconds.

•

Set

Continuous Ring

for the extensions, if you want the extensions to ring till the incoming call is

answered. Default: Disabled.

•

Enable

Rotation

, if you have selected more than one extension. Default: Disabled.

•

Click

. All the extensions you selected will appear in the

Extension

field, in the sequence you

selected, separated by commas.

•

To route the incoming call to an auto attendant, if the selected extensions do not answer the call,

45.

When Continuous Ring is selected, the first extension in the group you have created will continue to ring, even as the system hunts

for other extensions in the group to land the call. If the call still remains unanswered, the system will return the call to the first exten-

sion once again. This flag has no relevance, if you select only one landing extension.

46.

When Rotation is enabled, each new call lands on the extension next to the one that received the call last. This ensures equal dis-

tribution of incoming calls to all the destination extensions in this group.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands

Matrix ETERNITY NE, System Manual

Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands