Matrix ETERNITY NE System Manual Download | Manualshive

Page: 851 / 996

background image

Matrix ETERNITY NE System Manual

841

Trunk Reservation

What’s this?

This feature enables any extension user to reserve a trunk for exclusive use, for a specific time period.

Trunk Reservation can be requested from an SLT extension, a DKP extension and from an Extended IP Phone
extension.

How it works

Let us understand this feature with the help of an example:

In an organization there are four CO trunk lines, CO 1, 2, 3 and 4, but all of these have full traffic throughout the
day.

Extension user A is a sales executive. To complete the sales target, A needs to make long-distance calls to
customers. Since there this full traffic on all the four trunks throughout the day, and these trunks are constantly
busy, A would need a dedicated trunk line to save time and complete the target.

So, A can reserve one of the four trunk lines for the desired duration. To do this,

•

Extension A grabs a trunk by dialing the Trunk Access Code.

•

The Trunk is busy.

•

Extension A dials the feature access code for Trunk Reservation Access Code for the busy trunk.

•

As soon as the trunk is free, A’s extension rings.

•

A answers the call and gets connected to the trunk, and gets dial tone.

•

A can now make as many calls as required.

•

The trunk remains reserved for the duration of the Trunk Reservation Timer. This timer is configurable, and
by default is set to 10 minutes. A can have this Timer configured to the desired duration.

•

All other extension users who try to access this trunk get error tone, even if this trunk is free.

•

If A is finished with the calls before the expiry of the Trunk Reservation Timer, A has two options:
a) release the trunk manually, by cancelling Trunk Reservation.
or
b) wait for the expiry of Trunk Reservation Timer.

•

Only when the trunk is released (by A or at the end of the Timer) will other users be able to access it.

«
...
849
850
851
852
853
...
»

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNITY NE

Brand: Panasonic Pages: 580

Brand: Bogen Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands