HOW TO ADJUST THE Matrix E-Series
The Matrix E-Series can be adjusted for maximum comfort and exercise effectiveness. The
instructions below describe one approach to adjusting the Matrix E-Series to ensure opti-
mal user comfort and ideal body positioning; you may choose to adjust the Matrix E-Serie
cycle differently.
Pedal strap adjustment:
Sit on the saddle and position your feet on the pedals, with the balls of your feet
directly above the spindles of the pedals (see the drawing below). Adjust the pedal
straps so the toe clips (cages) are snug but not too tight. Note: In the case of a Bike
being fi tted with Combi-pedals, the pedals feature toe clips on one surface and SPD
cleats on the opposite surface. If desired, use the shoe cleats with cycling shoes
instead of the toe clips.
Saddle height adjustment:
Sit on the saddle and slowly pedal until the right pedal is in the lowest position. Your knees
should be slightly bent without a dropping of the hips.
To avoid hyper extending your knees, make sure that your legs are not completely
straight.
Please do not adjust
handlebar height beyond
the STOP mark on the stem
and ensure the pop pin is
fully engaged and securely
tightened (see page
7).
Please do not adjust saddle
height beyond the STOP
mark
on
the
stem
and ensure the pop pin is
fully engaged and securely
tightened (
see pag
e 6).
Please avoid overtightening the pop pin adjustment knob as this may cause dama-
ges to the vertical aluminum stems.
ENG
ESP
Version 1.0 2013 IC-MXEB-01 Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com
ENG 9
