1.4 electricAl reqUireMents
For your safety and elliptical performance, the ground on this circuit must be
non-looped. Please refer to NEC article 210-21 and 210-23. Your elliptical is
provided with a power cord with a plug listed below and requires the listed
outlet. Any alterations of this power cord could void all warranties of this
product.
1.5 instAllAtiOn reqUireMents
The elliptical must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. The elliptical is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances. If the user does not
follow these grounding Instructions, the user could void the Matrix limited
warranty.
DAnGer:
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or service-
man if the user is in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product if it will not fit the outlet;
have a proper outlet installed by a qualified technician.
2.1 recOMMenDeD cleAninG tips
Preventative maintenance and daily cleaning will prolong the life and look of
your MATRIX Elliptical Total Body Cross Trainer.
Please read and follow these tips.
•
Position the equipment away from direct sunlight. The intense UV light can
cause discoloration or plastics.
•
Locate your equipment in an area with cool temperatures and low
humidity.
•
Clean with a soft 100% cotton cloth.
•
Clean with soap and water or other non-ammonia based all purpose
cleaners.
•
Wipe foot pads, handles, heart rate grips, and handlebars clean after
each use.
•
Do not pour liquids directly onto your equipment. This can cause dam
age to the equipment and in the same cases electrocution.
•
Check pedal motion and stability.
•
Adjust leveling feet when equipment wobbles or rocks.
•
Maintain a clean area around equipment free from dust and dirt.
2.2 cHeck fOr DAMAGeD pArts
DO nOt
use any equipment that is damaged or has worn or broken parts. Use
only replacement parts supplied by Matrix Fitness Systems.
MAintAin lABels AnD nAMeplAtes
. Do not remove labels for any reason.
They contain important information. If unreadable or missing, contact Matrix
Fitness Systems for a replacement.
MAintAin All eqUipMent
Preventative maintenance is the key to smooth
operating equipment, as well as keeping the users liability to a minimum.
Equipment needs to be inspected at regular intervals. Defective components
must be replaced immediately. Improperly working equipment must be kept
out of use until it is repaired. Ensure that any person(s) making adjustments
or performing maintenance or repair of any kind is qualified to do so. Matrix
Fitness Systems will provide service and maintenance training at our corporate
facility upon request or in the field if proper arrangements are made.
cHApter 1: i
mportant
s
afety
i
nstructions
cHApter 2: p
reventative
m
aintenance
120 neMA 5-15r
120 neMA 5-15r
100
120
200
220
230
240+
50/60 Hz
1.8
1.8
0.9
0.9
0.9
0.9
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
sUpply vOltAGe (vAc) freqUency rAteD cUrrent (AMps)
