Matrix NAVAN CNX200 System Manual Download

Page: 775 / 1388

Matrix NAVAN CNX200 System Manual

765

You must configure the type of 'Call Proceeding Tone', according to your requirement; whether the
extension user should be connected to the speech path when the Calling Card number is out dialed or
when the called party number is out dialed. You can select any of the following Call Proceeding Tone
options, as per your requirement:

•

Network Tone:

If this option is selected, the extension user will get Ring Back Tone after dialing the

calling card number and again, after the system has dialed the called party number (when the system is
dialing out the number with Pause and Wait for Answer configured in the substitute number string).

•

Pseudo Tone:

If this option is selected, the extension user will get Feature Tone when the user has

completed dialing all the digits. At the end of the tone, the extension user gets connected to the called
party (destination number).

•

Silent:

If this option is selected, the extension user will get Silence (no tone), after the extension user

has completed dialing all digits. After dialing out the called party number in DTMF, the system will
connect the caller to the called party number (destination number).

•

Companding Algorithm:

The companding Algorithm - A law or



law—is automatically selected when you

select Region for NAVAN. However, if necessary, you may change the default companding Algorithm that
appears in this field. Select the companding Algorithm according to the Regulatory Requirement of the
country where NAVAN is installed. See

“Selecting the Region”

for details.

•

Language of SE, SA Web Interface:

The GUI of NAVAN supports the languages English, Italian, Spanish,

French, German, and Portuguese. When you select Region for NAVAN, one of these languages will be
applied as appropriate for the region you selected. For instance, if you selected India, English will be
applied. If you selected Spain, Spanish will be applied. If you selected a country where none of these
languages are the local language, English will be applied.

The language set by the system on Region selection will be applied on the pages of the GUI for every login
session. If you want to change the default language set on Region selection, select the required language
from the combo box. The language selected on this page will be applicable when you login the next
session of NAVAN.

•

Display Presence Status during Call on Extended IP Phone:

If you want to allow SIP extension users

to view the presence status of the extension they are calling, you must enable this flag. Default: Disabled.

•

Apply RCOC only if the caller calls back on the same trunk from which the call was made:

Enable

this flag, if you want NAVAN to match the Trunk Port Number and Trunk Port Type of the incoming call with
the Trunk Parameters of the entry stored in RCOC table before routing the call to the original caller.
Default: Disabled.

•

Detect Possible toll bypass attempt by Extn. during IC Call from CO Line & Drop the Call:

When

there is an incoming call on the CO Trunk and if total 5 digits are dialed out, before expiry of Trunk Inter
Digit Wait Timer, then the system will treat this outgoing call as a fraudulent call. To drop this call, enable
this flag. Default: Disabled.

Incoming CLI Modification

This parameter is useful in countries where the Calling Line Identification (CLI) received by the PBX extension
users must be suitably modified before it can be used to dial out the number. See

Matrix NAVAN CNX200, System Manual

Search results

Summary of Contents for NAVAN CNX200

Reviews:

Related manuals for NAVAN CNX200

Brands by name

Popular brands