Matrix PS 1000-45, Original Instructions Manual

15

GB

the type and year of construction of the machine.

In these operating instructions we have 

marked the places that have to do with your 

safety with this sign: 

General safety instructions for power 

tools

• WARNING Read all warnings and instructions. 

Failure to apply all warnings and instructions can 

lead to electrical shock, fire and/or serious injury.

• Keep all warnings and instructions handy for 

future consultation.

• The term “power tool” used in the warnings 

refers to power tools that are connected to a 

source of electrical energy (with an electrical 

cable)

1) Workplace safety

a) Keep your working area clean and well lit. 

Cluttered or dimly lit workspaces can lead to 

accidents.

b) Do not operate power tools in areas where 

explosions could take place, or in which 

flammable liquids, gases or dust are present. 

Power tools can create sparks, which can cause 

dust or fumes to ignite.

c) Keep children and bystanders away from the 

power tool when it is being used. Distractions 

could cause you to lose control over the 

equipment.

2) Electrical safety

a) The terminal plug of the tool must fit into the 

outlet.

The plug may not be modified in any way. 

Do not use an adaptor plug together with 

grounded power tools. The original plugs and the 

appropriate outlets reduce the risk of an electrical 

shock.

b) Avoid contact with grounded surfaces, such as 

pipes, radiators, stoves and refrigerators. There is 

an increased risk of electrical shock, if your body 

is grounded.

c) Keep power tools away from rain or wet 

conditions.

Mitre square:                                                          0°–45°

Depth of cut 90° mm:                                                  45

Depth of cut 45° mm:                                                   35

Weight kg:                                                                      4,2

Drive

Motor V/Hz:                                                   230-240/50

Input W:                                                                       1010

Protection class:                                                               II

Operating noise level and vibrations

Sound pressure level L

pA

: 87,7 dB(A), K

pA

: 3 dB(A)

Sound power level L

wA

: 98,7 dB(A), K

wA

: 3 dB(A)

Typical weighted vibrations a

h

 = 2,1 m/s², 

                                                       K = 1,5m/s²

Measured values corresponding to EN 60 745-2-5 

and EN 60 745-1

Subject to technical modifications!

Warning: Noise can have adverse health effects. 

Should the noise level increase above 85 dB(A), 

you must wear ear protection. Should the 

electrical supply not be optimal, then the current 

can drop for a short time when the machine is 

turned on. This can influence other equipment

(for example, the blinking of a lamp). Should the

electrical capacity have a Zmax < 0.27, such 

disturbances are not to be expected. (Should you 

have difficulties, please consult your local dealer.)

General notes

• After unpacking, check all parts for any 

transport damage.

Inform the supplier immediately of any faults.

• Later complaints cannot be considered.

• Make sure the delivery is complete.

• Before putting into operation, familiarize 

yourself with the machine by carefully reading 

these instructions.

• Use only original Matrix accessories, wearing 

or replacement parts. You can find replacement 

parts at your Matrix dealer.

• When ordering, include our item number and