Matrix Retail E30, Manual

3

WARNING!

There are several areas during the assembly process that special 

attention must be paid. It is very important to follow the assembly 

instructions correctly and to make sure all parts are firmly tightened. If 

the assembly instructions are not followed correctly, the equipment could 

have parts that are not tightened and will seem loose and may cause 

irritating noises. To prevent damage to the equipment, the assembly 

instructions must be reviewed and corrective actions should be taken.

PARTS INCLUDED:

F

1 Elliptical Frame

F

1 Console Mast

F

1 Console Mast Boot

F

2 Upper Dual Action Arms

F

2 Lower Dual Action Arms

F

2 Handlebar Caps

F

2 Pedals with Inserts

F

2 Transport Handles

F

1 Power Cord

F

1 Hardware Kit

Console sold separately

ASSEMBLY

Before proceeding, find your elliptical’s serial number located on a barcode 

sticker and enter it in the space provided below. 

SERIAL NUMBER

MODEL NAME

F

E30

F

E50 MATRIX ELLIPTICAL

* Use the information above when calling for service.

SERIAL NUMBER LOCATION

UNPACKING

Unpack the equipment where you 

will be using it. Place the carton 

on a level flat surface. Never open 

box when it is on its side.

NEED HELP?

If you have questions or if there are any missing parts, contact Customer Tech 

Support. Contact information is located on the information card.

IMPORTANT NOTES

During each assembly step, ensure that ALL nuts 

and bolts are in place and partially threaded. 
Several parts have been pre-lubricated to aid in assembly 

and usage. Please do not wipe this off. If you have difficulty, 

a light application of lithium grease is recommended.

TOOLS INCLUDED:

F

5 mm Allen Wrench

F

6 mm Allen Wrench

F

13/17 mm Flat Wrench

F

Phillips Screwdriver

ENGLISH