80
Matrix SETU ATA211 System Manual
•
For the number you entered, in the
Destination Address
field in the table, enter the
IP Address
of
the WAN Port of ATA connected at Location B. In this case, 190.1.1.100
•
For the number you entered, configure the digit length in the table. As the number you want to dial,
3001, has four digits, configure
Minimum Digit
for this number as ‘4’. Also configure the
Maximum
Digit as
‘4’.
The Peer-to-Peer table you configure for SETU ATA211 at Location-A would look like this:
As the system uses the best match logic to match number strings in the Peer-to-Peer table, you
may configure only the prefix of the number to be dialed. Instead of the complete number string, you
may configure only the prefix as follows, the system will place all calls that start with ‘3’ to the IP
Address 190.1.1.100
•
Similarly, the Peer-to-Peer table you configure at Location-B should look like this:
•
When user 2001 of Location-A or a caller on the FXO port calls 3001, the call is placed to the IP address
190.1.1.100 as the system finds a best match entry for the dialed number at index 002 of the Peer-to-Peer
table.
•
On receiving a call, the SETU ATA at Location-B routes this call to the FXS port, 3001.
•
Similarly, when the user 3001 of Location B or a caller on the FXO port, calls 2001, the call is placed to the
IP address 190.1.1.200 as the system finds a best match entry for the dialed number at index 002 of the
Peer-to-Peer table.
Index
Number
Name
Minimum Digit
Maximum Digit
Destination Address
001
No Match Found
01
24
002
3001
04
04
190.1.1.100
003
004
Index
Number
Name
Minimum Digit
Maximum Digit
Destination Address
001
No Match Found
01
24
002
3
04
04
190.1.1.100
003
004
Index
Number
Name
Minimum Digit
Maximum Digit
Destination Address
001
No Match Found
01
24
002
2001
04
04
190.1.1.200
003
004
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-matrix-setu-ata211
