161
Matrix SETU VFXTH System Manual
•
Configure member ports -
Member 1
to
Member 9
.
•
For each
Member
, select a SIP Trunk number from
1 to 32
from the combo box.
•
If you do not want any more members in a group, select
None
. For example, you want two
members in a group, select the SIP Trunk numbers for member 1 and 2, and set the remaining
members in the group to None.
•
Define the
Member Selection Method.
To route a call the system checks availability of a free port.
There are two options, namely:
•
First Free:
If there are multiple ports of the same type, the first port which is free will be used for
routing the call each time. For example, SIP Group Number 1 has four members SIP Trunk 1
(Member 1), 2(Member 2), 3 (Member 3) and 6 (Member 4). For every incoming call, SETU VFXTH
will check the status of Member 1 first. If free, the call will be routed using this port else system will
check status of Member 2 and so on.
•
Rotation:
If there are multiple ports of the same type, then the first call will be routed through the
first member port and the subsequent call through the next member port and so on. For example,
SIP Group Number 2 has four members SIP Trunk 6 (Member 1), 7(Member 2), 8 (Member 3) and
9 (Member 4). For the first incoming call, SETU VFXTH will check the status of Member 1 (SIP
Trunk 6). If free, the call will be routed using this port else system will check status of Member 2
(SIP Trunk 7) and so on. For the next call, system will check status of Member 2 (SIP Trunk 7). If
free, call will be routed using this port else Member 3 (SIP Trunk 8) will be checked. Similarly, for the
subsequent call the system will check the next member port in the group.
Default:
First Free
.
•
Click
Submit
to save the group.
•
Similarly you can create FXO Groups and FXS Groups.
•
To create Groups of FXO Ports, click
FXO Group
. You can create 12 Groups with 16 members in each
group.
You can create 12 Groups with 32 members in each group, if your SETU VFXTH supports 32 FXO Ports.
•
To create Groups of FXS Ports, click
FXS Group
. You can create 12 Groups with 16 members in each
group.
You can create 12 Groups with 32 members in each group, if your SETU VFXTH supports 32 FXS Ports.
