Matrix SETU VFXTH System Manual
196
You can generate report for a single FXO Port, by setting the same port number in the
From
and
To
fields.
•
Calls terminated on FXS Ports:
The system will generate report of calls that terminated on FXS Ports.
To generate report using this filter for both FXS Ports, set the range of the FXS Ports in the
From
and
To
fields.
You can also generate report for a single FXS Port, by setting the same port number in the
From
and
To
fields.
•
Calls terminated on SIP Trunks:
The system will generate report of calls terminated on the SIP
Trunks.To generate report using this filter for a range of SIP Trunks, set the range of the SIP Trunks in
the
From
and
To
fields.
To generate report for calls terminated on a single SIP Trunk, set the same trunk number in both fields.
•
Calls terminated on FXO Ports:
The system will generate report of calls that terminated on the FXO
Ports. Set the range of the FXO Ports in the
From
and
To
fields.
You can generate report for a single FXO Port, by setting the same port number in the
From
and
To
fields.
•
Calls made from:
The system will generate report of calls made between particular dates. Enter the
start date and end date in the corresponding
From
and
To
fields.
•
Calls made between:
The system will generate report of calls made between a particular time period.
Enter the start time and end time in the corresponding
From
and
To
fields.
•
Called Party Number Matching with Number List:
Select the Number List you want to assign to this
filter. Make sure that you also configure this Number List with the Called Party Numbers which you
want the system to match. See
for instructions.
•
Calling Party Numbers Matching with Number List:
The system generates report for calls received
from specific numbers.
Select a Number List you want to assign to this filter. Make sure that you also configure this Number
List with the Calling Party Numbers which you want the system to match. See
for
instructions.
•
Call Duration equal to and greater than (HH: MM: SS):
The system generates report for calls of a
specific time duration. Select the call duration in HH: MM: SS format.
•
Calls without PIN Number:
The system will generate report for calls without PIN Authentication.
•
Calls with PIN Number:
The system will generate a report for calls that were made using PIN
Authentication. You can generate report of calls of specific PIN Numbers.
Enter the range of PIN Numbers in the
From
and
To
fields. PIN Numbers can be in the range of 0000
to 9999. The system will generate Report of all calls having PIN Numbers within the range you have set
will be generated and displayed under the ‘PIN Numbers’ column of the report.
