Matrix SETU VFXTH System Manual
50
First Digit Wait Timer
•
If required, you may change the duration of the
First Digit Wait Timer (FDWT)
. This is the time in seconds
for the which the system will wait
for the user to dial the destination number. Valid range: 01–99 seconds.
Default: 7 seconds.
End-of-Dialing
•
In the
Inter Digit Wait Timer
field,
define the number of seconds the system should wait while receiving
the dialing digits, to consider it as end-of-dialing. You may change this timer, if required. Valid range: 01–99
seconds. Default:
5 seconds.
•
In the
End of Dialing Digit
box, select
#
or
*
as the termination digit that the system should consider to
detect end of dialing. Default:
#
•
In the
Maximum number of dialed digits that can be dialed by the caller
field,
select the maximum
number of digits to be dialed by the user for the system to consider it as end-of-dialing
.
Valid range: 01–24
digits. Default: 24 digits.
When the caller dials a number, the system will match it with the above end-of-dialing indications and
accept the one that matches first.
