Matrix SETU VFXTH System Manual
160
Group
SETU VFXTH supports the following methods of determining the destination port for the calls originated on FXO
Ports, FXS Ports and SIP Trunks.
•
Fixed
•
on the basis of Destination Number
•
on the basis of Calling Party Number
The Destination Port Determination Method- on the basis of Calling Party Number is not applicable for the
FXS Port.
For any of these methods that you select, you need to configure Routing Group and Fallback Routing Group.
A Routing Group may have
sequential
or
not-sequential
ports as members.
A Routing Group of
sequential
ports is to be formed when you select
FXO Port
or
FXS Port
or
SIP Trunk
as the
destination port.
A Routing Group of not-sequential ports is to be formed when you select
SIP - Group
or
FXO - Group
or
FXS -
Group
as the destination port. The
SIP/FXO/FXS Group
has members of the same port type, but not in a
sequence. A SIP Group can have only SIP Trunks as members. Similarly, a FXO Group can have only FXO Ports
as members.
Configuring Groups
To create a Group,
•
Click
Advanced Settings
link.
•
Click the
Group
link.
•
To create Groups of SIP Trunks, click
SIP Group
. You can create 9 Groups with 9 members in each group.
•
Select a SIP Group Number from
1 to 9.
