Matrix SETU VG Series, Quick Start Manual

Matrix SETU VG Quick Start

3

Installing SETU VG

Before You Start 

Before you begin to install and set up the hardware of SETU VG, make sure you have the following 
ready:
• A suitable location to install SETU VG.
• Power  supply.
• A SIP Account from an ITSP to test VoIP connectivity.
• A standalone computer or a computer connected in a LAN to access Jeeves, the web-based 

configuration tool of SETU VG.

• Appropriate cables and connectors to set up and test the WAN interface of SETU VG and the 

LAN connection.

• A SIM Card to test Mobile connectivity.

•

Do not install this product near any area where,
•

it is exposed to direct sunlight, heat, excessive cold or humidity, dust, oil, corrosive fumes. 

•

there is a water source (wash basin, tub, shower, pool, sprinkler, etc.) 

•

there is source of electromagnetic noise such as radio equipment, heavy transformers, faulty electric 
chokes of tube-lights, device having a faulty coil.

•

Ensure proper electrical earth and telecom earth for the safety of the product and persons handling it.

•

Always wear an electro static discharge preventive wrist wrap or belt and use a grounding mat when handling 
the product and its parts. 

•

SETU VG contains a 3VDC/18mAh (Li-Al) alloy-Manganese Dioxide Coin Battery (ML 1220 - Rechargeable) 
of diameter 12.5mm and height 2.0mm.  Battery should be replaced only by authorized dealers of Matrix. 
There is a risk of explosion if the Battery is replaced in an incorrect manner. Please dispose-off used 
Batteries.

Getting Started

• Select an appropriate site to install the SETU VG, considering the safety precautions listed 

earlier in this chapter.

• Unpack SETU VG and verify the package contents. The Package of SETU VG8 contains:

• SETU  VG  Unit
• Power Adapter - 12VDC, 2A (Country Specific)
• Universal Converter Plug 2 PIN
• Interchangeable Plug EU
• Two

1

 GSM Antenna with SMA Connector