background image

i

MATROX SOFTWARE LICENSE AGREEMENT

MATROX SOFTWARE LICENSE AGREEMENT 

(HEREAFTER REFERRED TO AS LICENSE)

THIS IS A LEGAL AGREEMENT BETWEEN THE LICENSEE AND MATROX ELECTRONIC SYSTEMS LTD 
("MATROX") CONCERNING THE USAGE OF THE MATROX SOFTWARE. BY DOWNLOADING, 
INSTALLING, COPYING, ACCESSING, CLICKING ON AN "ACCEPT" BUTTON, OR OTHERWISE USING 
THE SOFTWARE, THE LICENSEE AGREES TO THE TERMS OF THIS LICENSE. IF YOU ARE ACCEPTING 
THESE TERMS ON BEHALF OF YOUR COMPANY, ORGANIZATION, EDUCATIONAL INSTITUTION, OR 
AGENCY, INSTRUMENTALITY, OR DEPARTMENT OF THE FEDERAL GOVERNMENT AS ITS 
AUTHORIZED LEGAL REPRESENTATIVE, YOU REPRESENT AND WARRANT THAT YOU HAVE FULL 
AUTHORITY TO BIND LICENSEE TO THESE TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS 
LICENSE, PLEASE RETURN YOUR MATROX PRODUCT. IF THE SOFTWARE WAS DOWNLOADED, 
DESTROY ALL COPIES OF THE SOFTWARE.

In this License "Software" refers to: any firmware, software, associated software components, media, printed 
materials, and "online" or electronic documentation related to Matrox products. 

The Software is not sold, and instead is only licensed for use, strictly in accordance with this document. This License 
does not cover the sale of hardware, since it may not necessarily be sold as a package with the Software. This License 
sets forth the terms and conditions of the Software license only.

Any Software provided to Licensee is the copyrighted work of Matrox and/or third party software suppliers (if any). 
The present License does not give Licensee any intellectual property rights to the Software or its derivatives. The 
downloading and/or the use of any Software are subject to the following restrictions and limitations: 

LICENSES: 

If you are an end user, the "End User License" shall apply to you.

If you are an original equipment manufacturer (OEM), the "OEM License" shall apply to you. 

END USER LICENSE

1

Licensee may install the Software on an unlimited number of computers owned or leased by Licensee in any 
location. The Software is subject to a restricted license therefore Licensee must use the Software on a single 
computer owned or leased by Licensee at a time, in conjunction with and for the purpose of, operating the Matrox 
hardware product. Use of the Software in conjunction with non-Matrox products is prohibited and not licensed 
hereunder. Licensee shall also have the right to make one copy of the Software in any computer-readable or printed 
form for back-up or archival purposes;

2

No right to recopy, publish, display, network, rent, loan, lend, assign, sell, distribute, license, sub-license, alter, 
modify, disassemble, de-compile, create derivative works or reverse engineer any Software in any manner 
whatsoever is hereby given, except as provided in this License. Violation may result in severe civil and/or criminal 
penalties, as violators will be prosecuted to the maximum extent possible; 

3

Licensee agrees to treat the Software as confidential information, and shall protect said information by using the 
same degree of care Licensee uses to protect Licensee's own confidential information, but no less than a 
reasonable degree of care, to prevent the unauthorized use, dissemination, disclosure or publication of such, or to 
use this Software to: (i) develop inventions directly derived from confidential information to seek patent 
protection; (ii) assist in the analysis of Licensee's patents and patent applications; or (iii) modify Licensee's 
existing patents or patent applications;

4

Licensee may only provide and disclose parts of the Software to third parties who have a need-to-know for the 
purpose of installation, service integration and/or support of said Software within Licensee's product. In such 
event, Licensee may only disclose the relevant and necessary parts of the Software to permit the third party to 
accomplish his work provided that all such disclosures shall be subject to the terms and conditions of this License;

5

Licensee may not grant any sublicense, lease or other right in the Software to others;

Summary of Contents for M264











































































Reviews: