16
Matrox Maevex 6020 Remote Recorder – User Guide
Network connector
The network connectors on your product use LEDs to provide
information on the network activity and presence. The following
describes the different network connector LEDs.
Validating network discovery
Maevex devices are initially assigned their IP addresses through DHCP (Dynamic Host Control
Protocol). After connecting your devices, we recommend verifying that all of your devices are
discovered by the network. For more information, contact your network administrator.
Multiple subnet support
Maevex devices that are in the same subnet are detected through the UPnP (Universal Plug and Play)
protocol. If your devices are in different network subnets, you need to validate network discovery in
each subnet separately. For more information on using different subnets, contact your network
administrator.
After validating your connection setup, configure and update your Matrox Maevex remote recorder
(
see “Configuring your Maevex remote recorder”, page 17
LED color
Network activity
Network presence
LED off (black)
No data transfer in progress
or no network detected.
No communication
established.
Green (flashing)
Data transfer in progress.
—
Orange
—
Network communication
established.
Network
activity
Network
presence
