Mainboard User’s Manual
10
Installing a Socket-462 Processor
Install a processor into the ZIF (Zero Insertion Force) Socket-462
on the mainboard.
1.
Locate the Socket-462 and CPUFAN. Unlock the socket by
pressing the locking lever slightly sideways, and then lift it to
the upright position.
2.
On the processor, identify the Pin-1 corner by its beveled edge.
3.
On the Socket-462, identify the Pin-1 corner. The Pin-1 corner
is at the end of the locking lever when locked.
4.
Match the Pin-1 corner of CPU with the one of socket, and
insert the processor into the socket. No force is required and
the processor should drop into place freely.
5.
Push down the locking lever and hook it under the latch on the
edge of the socket. This secures the CPU in the socket.
6.
All processors should be installed with a combination
heatsink/cooling fan, connect the cable from the fan to the
CPU fan power connector CPUFAN 1.
CPUFAN1
Socket-462
Pin-1 Corner
Summary of Contents for MS8328E Series
Page 4: ...Mainboard User s Manual IV ...
Page 24: ...Mainboard User s Manual 20 ...
