INST
ALLA
TION
GUIDE
GB-6
ELECTRICAL.CONNECTION
• Your washing machine requires a 220-240Volts, 50Hz. mains supply.
• A specially earthed plug has been attached to the mains cable of your washing machine.
This plug must be inserted to a earthed socket. The fuse value of the electricity line
attached to this should also be at lease 10 amper. If you have no such sockets and fuses in
your house, please consult a qualified technician.
• THIS APPLIANCE MUST BE EARTHED.
• Insert the machine’s plug to a earthed socket which you can easily reach.
WATER.SUPPLY.CONNECTION.
• Depending on the features of your machine, it may be fitted with a single water inlet
(cold) or double water inlet (cold/hot). The white headed hose is for cold water inlet and
red headed hose is for hot water inlet (valid for machines with hot & cold water inlet).
• To prevent leakage from the connection joints, seals are included in the hose packaging.
Fit these seals at the end of water inlet hoses on the tap side.
• Connect the white headed hose to the water inlet valve with the white filter and connect
the red headed hose to the water inlet valve with the red filter (latter is valid in machines
with hot&cold water inlet). Tighten the plastic parts of the connections with your hand.
Please call a qualified plumber for safer connections.
• Water pressure of 0, 1-1 MPa (1-10 bars) from your tap will enable your machine to work
more efficiently. (0,1 MPa pressure means water flow of more than 8 litres in 1 minute from
a fully opened tap)
• After connections are complete, check the connection joints for any leaks by turning your
tap slowly to the fully opened position.
• Ensure the water hoses do not become folded, broken or crushed.
• Mount the water inlet hoses to a 3/4”, geared water tap.
Hot water inlet (Red filter valve)
Cold water inlet (White filter valve)
M100WM10E_20100209_without PN.indd 6
