12
installation guide
Fitting the hob into a work surface
1
The hob can be fitted into any work surface provided it is heat resistant up to
at least 90ºC.
2
Create an opening with the dimensions shown in the picture below.
The distance
between the rear edge of the hob and any adjacent wall depends on wall
surface. Please dont use easily combustible material like curtain, paper at nearby
the hob.
3
Apply the one-sided self-adhesive sealing tape supplied all the way round the
lower edge of the cooking surface along the outer edge of the glass ceramic
panel. Do not stretch it. Screw the 4 worktop mounting brackets on the side walls
of product.
worktop mounting bracket
520mm
590mm
41mm
560mm
490mm
Min.
130mm
Min.
25mm
Min.
A
Neighboorhood walls
A [mm]
B [mm]
Combustible
60
150
Non-combustible
25
40
Min.
B
Summary of Contents for MCE61TC
Page 1: ...MCE61TC...
