14
installation guide
2
2
2
The power supply cable must be positioned away from direct heat sources. It should
not be subjected to a temperature rise of more than 50
0
C above room temperature.
This appliance conforms with the requirements of the following EEC Directives:
.
Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio interference,
.
EEC/89/109 relating to contact with foods.
Power connection box
For the touch controlled and knob controlled Vitroceramic hob the cable type must
be H05VV-F 3 x 2.5mm
2
and the connection should be made as in this diagram.
The cable clamp inside the power connection box can be used in two different ways.
For flat cables, the cable clamp should be positioned as shown in figure A. For round
cables, the clamp should be positioned as shown in figure B.
Cable clamp
Figure A
Cable clamp
Figure B
Summary of Contents for MCE61TC
Page 1: ...MCE61TC...