GB
9
Levelling the Freezer
To do this use the two levelling feet at the front of the freezer.
If the freezer is not level, the door and magnetic seal alignments
will not be covered properly.
Cleaning Before Use
Wipe the inside of the freezer with a weak solution of bicarbonate soda. Then rinse with warm water using
a ‘wrung-out’ sponge or cloth. Wash the baskets in warm soapy water and dry completely before replacing
in the freezer. Clean the exterior of the freezer with a damp cloth.
If you require more information refer to the
CLEANING
section.
•
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the freezer.
•
Before Turning On!
Do not turn on until two hours after moving the freezer. The coolant fluid needs time to settle.
Before Using Your Freezer
Before placing any food in your freezer, turn it on and wait for 24 hours, to make sure it is working properly
and to allow the freezer to fall to the correct temperature. Your freezer should not be overfilled.
6. Check that the door is aligned horizontally and vertically and
that the seals are closed on all sides before finally tightening
the bottom hinge. Re-adjust the leveling feet.
5. Slide the freezer door back on to the top hinge. Screw the
bottom hinge into place on the new side.
MUF50W10E_IB_5L_111025_ELable.indb 9
11年10月25日 下午6:41
