Satety
W
arnings
Operation
Cleaning
and
Troubleshooting
Specification
Before
Use
GB-
Reverse the door swing
Ensure the appliance is unplugged
and empty.
Adjust the two leveling feet to their highest
position.
We recommend you have someone to assist you.
Tools required
Phillips style screwdriver
Flat bladed screwdriver
Hexagonal Spanner
•
•
•
•
•
•
•
NOTE: Take the door off it is necessary to tilt the larder
backward. You should rest the larder on something
solid and place something under the rollers so that it
will not slip during the door change process.
DO NOT lay the larder completely flat as this may
damage the coolant system.
Remove the screws and the hinge bracket from the base. A spanner may be required to loosen the bolts fin.
Remove the screws and beackets from the opposite side and fit back to where the hinge bracket was located.
Slide the door down, off the top hinge pin and lift away from the appliance.
Remove top hinge pin and spring inside. Refit on the opposite side.
Slide the freezer door back on to the top hinge. Make sure it is the right way up. Screw the bottom hinge into place
on the new side.
Check that door is aligned horizontally and vertically, and that the seals are closed on all sides before finally tight-
ening the bottom hinge. Re-adjust the levelling feet.
1.
.
.
.
.
6.
Matsui MUF857W-WE_GB_IB_Final_094 4
21/05/09 2:28:37 PM
