44
GB
Introduction your New Freezer
Install your New Freezer
Location
When selecting a position for your Freezer you should make sure the floor is flat and firm, and the room is
well ventilated with an average room temperature of between 16ºC and 32ºC. Avoid locating your Freezer
near a heat source, eg. cooker, boiler or radiator. Also avoid direct sunlight as it may affect the acrylic
coating and increase the electrical consumption. Extreme cold ambient temperatures may also cause the
appliance not to perform properly. This Freezer is not designed for use in a garage or outdoor installation.
Do not drape the Freezer with any covering. When installing, ensure that 2cm (3/4”) of free space is left at
the sides. The Freezer door can open to the right or the left, depending on what better suits the location.
If you want to have the door swing reversed, we recommend you to contact the Service Centre or a
qualified technician to assist you. You should only try to reverse the door yourself if you believe that you
are qualified to do so.
• Take the door off as it is necessary to tilt the Freezer backward. You should rest the freezer
on something solid so that it will not slip during the door change process. DO NOT lay the
Freezer flat as this may damage the coolant system.
• Ensure the Freezer is unplugged and empty.
• We recommend that 2 people handle the Freezer during assembly.
Control panel
Ice tray
Freezer
Baskets
Levelling feet
Before Use
Please read these instructions carefully before using your new Matsui Freezer.
The freezer is for indoor, domestic use only
MUF988W_WE_WEA_S_SE_IB_5L_final110512_door change.indb 4
12/05/2011 7:00 PM
