2
4. For Safe Use
In order to use the product safely, the following symbols are
displayed in the instruction manual and on the product.
Understand the meaning of the symbols and observe each
item. Depending on the product, some symbols may not be
used.
Indicates content that could cause death
or serious injury.
Indicates content that could cause injury
or damage to property.
Indicates danger/warning/caution. Refer to
the instruction manual when using the part
with this symbol.
Indicates where high voltage is handled.
Touching it may cause electric shock and
result in death or serious injury.
This symbol means "Prohibited".
Indicates that it must be performed in
order to demonstrate the performance of
the product.
Protective earth terminal
(Ground terminal for electric shock
prevention)
Ground terminal
Frame or chassis terminal
High temperature attention Touching it
carelessly may cause burns
Power On
Power Off
Power standby
The product will not be completely
disconnected from the power supply even
if it is set to standby.
Bistable push button switch on
Bistable push button switch off
Alternative Current
Understand the risk
Products generate high voltage and energy.
An electrician or equivalent knowledge must read the
instruction manual to the end and familiarize yourself with
the proper use and danger of the product.
If you want the product to be handled by another person,
limit it to those with knowledge of electricity, and have
people who are familiar with correct use and danger of the
product conduct education and training before handling it,
or handle the product under the supervision of those who
are familiar with the proper use and danger of the product.
Persons, with the exception of the above, must not handle
the product.
Do not open the product case and panel.
Do not disassemble, remodel, or repair by opening the
product case and panel yourself. There is a high voltage
area inside, which may possibly cause electric shock and
fire.
Never remove the case and panel of the product, since the
safety and function of the product will not be guaranteed.
It is not suitable for use in places where there is a
possibility of a child being present.
The product is designed assuming that it will be used in
places where there are only adults, such as factories and
laboratories. Do not use it where there is a possibility of a
child being present.
Ensure that the product is handled only by a limited
number of people.
Only those who are familiar with the proper use and danger
of the product, or those who are educated and trained by
them should install the product. Any other person
handling the product may cause electric shock, burns and
injuries.
Ground it.
When the product has a protective ground terminal or GND
terminal, connect it to the ground.
If the input terminal of the product is an inlet type, connect
to the power outlet with the ground using the supplied
power cable or a power cable suitable for the area to be
used. If it is not connected to the ground, there is a risk of
electric shock and fire, which is extremely dangerous.
About power supply cable
Connection of the power cable should be done by an
electrician or someone who has equivalent knowledge and
is familiar with the correct usage and danger of the product.
Refer to the page about connection of the input cable in the
instruction manual and carry out work. For products that
have acquired safety standards, also refer to the page that
describes overvoltage categories.
About the connection of the power supply cable
Connection of the power cable should be done by an
electrician or someone who has equivalent knowledge and
is familiar with the correct usage and danger of the product.
Refer to the page about connection of the input cable in the
instruction manual and carry out work. For products that
have acquired safety standards, also refer to the page that
describes overvoltage categories.
About input voltage
For the input voltage of the product, refer to the page
describing the input terminal of the product and the input
voltage in the instruction manual. Do not supply input
exceeding the specifications of the product.
Symbols
WARNING
