Matsusada EP Series, Instruction Manual

4

３－１  Outline 

EP series is high performance high voltage power supply for PMT application. Ultra compact 
size  of  just  8.35-inch(212mm)  width  integrated  HV  power  supply  and  power  supply  for 
preamplifier  ±15V  and  ±5V.  The  ultra  low  ripple  noise  is  suitable  for  PMT  and  various 
other applications. 

３－２  Operation method 

1.

Upon confirming the connection made with this unit as specified (P.2 [HOW TO GROUND]), 

operate it. Be sure to connect the earth with the  ground terminal of the unit. 

2.

Connect the attached AC input cord with AC input connector. 

3.

Turn on the POWER Switch. The unit gets in stand-by mode.   

4.

Turn the output voltage setting dial to adjust the voltage as desired. 

When the HV is OFF, value of each digit can be set with cursor key. 

When the HV is ON, the output voltage can be set each 1V. 

5.

When the HV is OFF, the set voltage on the display. 

When the HV is ON, the output voltage and current on the display. 

6.

For ending the operation of the power supply, turn off the POWER ON/OFF switch. The set 

value is returned to 0V. 

３

  Operation manual 

３ 

Operation manual

FOR  PREVENTION  OF  DANGER,  BE  SURE  TO  CONNECT  GND 
TERMINAL TO THE EARTH