5 Operation on the Main Unit
26
HARS series
5-1-6 Switching Monitor Screen
When you switch to the monitor screen, the output display becomes larger and easier to see.
The output values cannot be changed on the monitor screen.
5-1-7 Setting Protections and Limits
For protection (overvoltage protection/overcurrent protection protection), if the output value becomes
higher than the set value, an error will be displayed and the output will be cut off (Output OFF).
As of the limit (voltage limit/current limit), when each setting (voltage/current) value is input, the input
value is limited by the value set in H-Limit.
To change each set value, touch the respective item on the touch panel display.
On the preset value setting screen, not only the protection and limit but also the setting values can be
modified.
Setting screen
Voltage
Home screen
Monitor screen
Home screen
Current
Output setting value
Protection setting value
Limit setting value
Preset setting screen
Summary of Contents for HARS Series
